Recording Model And Serial Numbers; Checking System Requirements; Document Conventions - Creative BLASTER PCMCIA Card Getting Started

Recording Model and Serial Numbers

Your PCMCIA card has a model number and a serial number. The numbers are
found on the bottom-side of the device. After removing the Network Blaster from
its packaging, write down its model and serial numbers for future reference. You
will need to provide these numbers when contacting our Technical Support.

Checking System Requirements

The following are the minimum system requirements:
® ®
• Intel Pentium
• 20 MB of free hard disk space
• 64 MB RAM
®
• Microsoft Windows
Millennium Edition (Me) or Windows XP
• CD-ROM drive
• Available PCMCIA slot (68-pin, 16 bit, Type II)

Document Conventions

This manual uses the following icons to highlight useful or urgent information:
❍
❍
❍
❍
II 233 MHz processor or equivalent
®
98 Second Edition (SE), Windows 2000, Windows
Tip. This tells you about shortcuts or hints relating to a feature.
Note. This highlights additional or important information about a
feature.
Caution! This highlights proper usage of your product. Use this
information to avoid situations involving risk.
Warning! This warns you of possible hazards, which may result in
injury to yourself or damage to the product.
7