Creative BLASTER PCMCIA Card Getting Started page 21

8
Click the Encryption tab
(Figure 4-3).
9
Click the Encryption
box, and then select
either 64 or 128 bit.
10
Click either the Hex or
ASCII option to select it,
and then complete the
key table with either
hexadecimal or ASCII
values. These keys serve
as passwords that
encrypt your data before
transmission.
For more information on hexadecimal (HEX) values, refer to "Hexadecimal" on
page 42 and for more information on ASCII values, refer to "American Standard
Code for Information Interchange (ASCII)" on page 39.
11
Click the Authentication Type box, and then click the authentication type
that is the same as your access point or Ad-Hoc network.
12
Click the Submit button.
Figure 4-3
20