Changing The Element Reference - Parrot ANAFI USA GOV User Manual

(2) CoT elements: controller and drone
The CoT element appears on the right of the screen when activated.
Target coordinates
of the white
crosshairs in the
center of the screen

Changing the element reference

Tap Switch reference to change the element reference (Drone or Skycontroller
USA).
In the example below the target is 507m north of the drone, and 27m northwest of
the pilot's position.
Drone reference (in green)
Note: In drone reference, if the target is under the drone, the distance between the
drone and target is negative, for example, when the drone looks down. If the target is
above the drone, the distance between the drone and target is positive, for example,
when the drone looks up.
In Skycontroller USA (pilot) reference, if the target is under the pilot, the distance
between the pilot and target is negative, for example, if the pilot is at the top of a
User Guide v6.9.0GOV – © Parrot, January 20, 2023
Horizontal and vertical
distance Target-reference
(Skycontroller USA or
Drone)
Coordinates of the
reference (Skycontroller
or Drone)
Skycontroller USA/pilot reference (in
blue)
Azimuth in
relation to
North
Accuracy of Reference
coordinates
(Skycontroller or Drone)
Accuracy of
Target
coordinates
Type of map used
corresponding to the
area of the target in
the crosshairs
101