B Maintenance; Instrument Cleaning Instruction; How To Insert Paper Into Thermal Printer - Raytech mini-ATOS Instruction Manual

B Maintenance

B.1 Instrument Cleaning Instruction
•
Before the cleaning, disconnect the device from the Mains circuit.
•
Use only lint-free cloth for the cleaning and when required slightly dampened with
water.
•
Never spray cleaners directly on the front panel. You can spray cleaners directly on
the outer surface of the case only when the door is closed completely.
•
Never use cleaning solutions that contain bleach or abrasives.
B.2 How to Insert Paper into Thermal Printer
90297-0.22 Instruction Manual mini-ATOS
•
Open the paper tray by slightly
pulling the lever upwards. The paper
tray can now easily be opened.
•
On the paper roll, the printable side
is the outside of the paper roll.
•
Unwind a few cm (inch) of paper
from the roll.
•
Keep the layers wound tightly when
inserting the paper roll into the paper
tray. The paper outside shows
towards the printer mechanism.
Page 88 of 92