Table of Contents
Advertisement
Safety Warnings
•
Never install telephone wiring during a lightning storm.
•
Never install a telephone jack in a wet location unless the jack
is specifically designed for wet locations.
•
Never touch uninsulated telephone wires or terminals unless the
telephone line has been disconnected at the network interface.
•
Use caution when installing or modifying telephone lines.
•
Avoid using a telephone (other than a cordless type) during an
electrical storm; there may be a remote risk of electrical shock
from lightning.
•
Do not use a telephone in the vicinity of a gas leak.
Step 1: Assemble the Modem
The only assembly required is to mount the feet on the bottom of the
modem. Simply peel the four self-adhesive plastic feet off the backing strip
and press them into the recesses on the bottom of the modem. Alternately,
or additionally, you can use the included self-adhesive Velcro patches to
mount the modem to a vertical surface or to keep it from being dislodged
on a horizontal surface. If you use the Velcro patches, we recommend that
you mount them where they will not obscure the labels on the bottom of the
modem.
Figure 2-1. Mounting the feet.
Chapter 2 - Quick Start
9
Advertisement
Table of Contents
