Multitech MT1932ZDX Quick Reference Manual page 40

MT1932ZDX Quick Reference Guide
Command: R n
Values:
Default:
Description: R0
R1
&R n
Command:
Values:
Default:
Description: &R0
&R1
&R2
&RD n Square Wave Ring Detect
Command:
Values:
Default:
Description: &RD0 Modem detects only sine wave rings.
&RD1 Modem detects both sine and square wave rings.
Command: &RF n CTS/RTS Interaction Control
Values:
Default:
Description: &RF0 Let CTS follow RTS.
&RF1 Let CTS act independently (use with &R).
$R n
Command:
Values:
Default:
Description: $R0
$R1
40
Reverse Originate/Answer Modes
n = 0 or 1
0
Modem will not reverse modes.
Modem will reverse modes when R is added to
the dial string.
Clear to Send Control
n = 0, 1, or 2
1
Let CTS state follow RTS state when on line.
Force CTS high (on).
Let CTS drop on disconnect for time set by S24,
then go high again.
n = 0 or 1
1 (ZDX)
0 (ZDXI, ZDXK)
n = 0 or 1
1
Retransmit Count
n = 0 or 1
0
Disconnect after 50 retransmits of a data block.
Do not disconnect after 50 retransmits.