Table of Contents
Advertisement
4.
Answer Y or N to the automatic logoff question.
5.
Select a file transfer protocol by typing the indicated letter, such as Z
for Zmodem (the recommended protocol).
6.
If you select Zmodem, the transfer will begin automatically. If you
select another protocol, you may have to initiate the transfer yourself.
(In most datacomm programs, the PAGE DOWN key initiates the
download.)
If you don't know the file name
1.
From the Main Menu, type F to access the Files Menu. For a list of file
areas, type L twice. (If you do not type the second L , you will list all
of the files on the BBS.)
2.
Mark the file areas you would like to examine by typing each file area's
list number and a RETURN.
3.
Enter L to list all the files in the selected file areas. Enter C to go
forward in the file list and P to go back.
4.
Mark one or more files for download by entering M, the list numbers
of the files, and a RETURN.
5.
Enter D. You will see a list of the files you have marked. Enter E if you
would like to edit the list; otherwise enter D again to start the download
process.
6.
Select a file transfer protocol by typing the indicated letter, such as Z
for Zmodem (the recommended protocol).
7.
If you select Zmodem, the file will transfer automatically. If you select
another protocol, you may have to initiate the transfer yourself. (In
MEWTERM and many other communications programs, the PAGE
DOWN key initiates the download.)
8.
When the download is complete, enter S to return to the File Menu.
Appendix C - Service, Warranty and Tech Support
79
Advertisement
Table of Contents
