Vacuums
Hand Vacuum
Skimmer Mount: TOP
Operation of Hand Vacuum:
Set up: The pool pole attaches to the vacuum head; the
head is attached to one of the skimmers by using a vacuum hose.
Make sure the vacuum hose you own is long enough to reach from the
skimmer to the furthest end of your pool. Adjusting skimmer valves not in use
with the vacuum may be needed for best results. Never vacuum through the
filter, always vacuum to waste.
Helpful Hint: If your pool has two skimmers, close the one not
supporting the vacuum one half turn to maximize your suction.
Suction Side
Skimmer Mount: FACE
Pressure Side Sweep: Separate Pump
If your pool has one skimmer only, vacuums such as Baracuda are not the
vacuum for your pool. If you have a DE filter, this is also not the vacuum for
your pool.
Robotic with Countdown Timer:
These DC voltage driven vacuums are the most expensive but arguably the
best. Blue Diamond, Aquabot, Tigershark, and Dolphin Shark are the proven
brands.
In-Floor and Pop-Up
In-Floor Cleaning Systems provide performance by systematically moving
heavy debris toward your pool's main drains, while suspending the light
debris, which are removed by the standard filtration process.
*hand vacuums may still be needed with other vacuum
types
24
Copyright © 2014 | All Rights Reserved | ECOsmarte® Planet Friendly, Inc. | www.ecosmarte.com | 612-866-1200
Need help?
Do you have a question about the Pool System and is the answer not in the manual?