Table of Contents
Advertisement
Additional functions using the PC interface
Carrying out a firmware update
Connect the telephone and the PC using a USB data cable
Establish connection to the handset
Start firmware update in Gigaset QuickSync . . . Information about this can be found in
Gigaset QuickSync help feature
The update process may take up to 10 minutes (not including download time).
Do not interrupt the process and do not remove the USB data cable.
The data are first downloaded from the online update server. The time required for this depends
on Internet connection speed.
The display on your telephone is switched off, the Message key
Once the update is complete, your telephone will automatically restart.
Procedure in the event of an error
If the update procedure fails or the telephone no longer functions properly after the update,
repeat the update procedure:
End the Gigaset QuickSync program on the PC
telephone
Remove the battery
Carry out the firmware update again as described above
If the update procedure fails more than once or it is no longer
possible to connect to the PC, carry out the Emergency Update:
End the Gigaset QuickSync program on the PC
USB data cable from the telephone
Press and hold keys
forefinger and middle finger
Release keys
Talk key
will flash alternately
Carry out the firmware update as described above
Always save pictures and sounds uploaded onto the handset on the PC, as they are
deleted during an Emergency Update.
54
Re-insert the battery
Remove the battery
and
at the same time with the
Replace the battery
and
. . . the Message key
Launch Gigaset QuickSync
and the Talk key
Remove the USB data cable from the
Remove the
and the
flash.
Advertisement
Table of Contents
