Table of Contents
Advertisement
Handset
Setting up the handset for use
The display is protected by a plastic film.
Inserting the batteries
Only use rechargeable batteries, as this could otherwise result in significant health
risks and personal injury. For example, the outer casing of the batteries could be
destroyed or the batteries could explode. The device could also malfunction or be
damaged as a result of using batteries that are not of the recommended type.
Insert the batteries (for
correct +/- direction, see
diagram).
Charging the batteries
Charge the batteries fully prior to first use in the
base station/charging cradle or using a standard
USB mains adapter.
The batteries are fully charged when the power
icon
disappears from the display.
The battery may heat up during charging. This is not dangerous.
After a time, the charge capacity of the battery will decrease for technical reasons.
Handsets contained in the package have already been registered to the base station.
In the event that a handset is not registered however, (indicated by Please register
handset), register the handset manually (
10
Please remove the protective film!
Fit the battery cover from
the top.
Press the cover until it
clicks into place.
p. 55).
To re-open the battery cover:
Insert a fingernail behind
the notch at the top of the
cover and slide it
downwards.
7 h
Advertisement
Table of Contents
