Table of Contents
Advertisement
Lenovo Moto X (4
th
Generation)
Level 2 – Service and Repair Manual
PCB Removal
NOTE
The PCB can be recovered and
reused after removal.
1.
Use the Thin Plastic Spudger to disengage
one of the 2 Rear-Facing Imager BtB
Connectors from the connections on the PCB.
2.
Use the Thin Plastic Spudger to disengage
the other of the 2 Rear-Facing Imager BtB
Connectors from the connections on the PCB.
3.
Use your fingers to disengage the Battery BtB
Connector from the connection on the PCB.
4.
Use the Thin Plastic Spudger to disengage
the Headset Jack BtB Connector from the
connection on the PCB.
PAGE 33
12/20/2017
Lenovo Confidential Restricted:
Do not share without consent from Lenovo
Advertisement
Table of Contents
