Pcb Assembly - Lenovo Moto X 4th Generation Service Manual

Lenovo Moto X (4 th Generation)
Level 2 – Service and Repair Manual

PCB Assembly

Description
ASSY,PWA,SLG,MAIN,PAYTON LATAM,QJX
IBIS FRU MB LATAM 3+32G CS
IBIS FRU MB NA 3+32G CS
IBIS FRU MB EMEA 3+32G CS
IBIS FRU MB EMEA 4+64G CS
IBIS FRU MB APAC 4+64G CS
IBIS FRU Rear Housing ASSY Nimbus CS
IBIS FRU RearHousing Google Nimbus CS
IBIS FRU RearHousing ASSY Black CS
IBIS FRU Rear Housing Google Black CS
HSG,REAR,IBIS,Brazil,with LASER,Nimbus,L
HSG,REAR,IBIS,Brazil,with LASER,Super Bl
1. Hold the PCB on an angle with the bottom
end of the PCB above the pocket in the Rear
Housing as shown.
2. Lower the bottom end of the PCB into the
Pocket on the Rear Housing, being careful to
position the Battery BtB Connector, the
Headset Jack BtB Connector, and the USB
Port BtB Connector above the PCB as shown.
3. Lower the top end of the PCB into the pocket
on the Rear Housing, being careful to position
the 2 Rear-Facing Imager BtB Connectors
above the PCB as shown.
NOTE
Verify the BtB Connectors for the Rear-Facing
Imager, the Headset Jack, the USB Port, and
the Battery are positioned above the PCB and
are undamaged before proceeding with the
next steps.
PAGE 100
12/20/2017
Reference #
3
4
Lenovo Confidential Restricted:
Do not share without consent from Lenovo