Table of Contents
Advertisement
Lenovo Moto G Power
Level 2 – Service and Repair Manual
Main PCB Removal
NOTE
The Main PCB can be recovered and
reused after removal.
1.
Use the Plastic Tweezer to remove the Coax
Cables from the location as shown.
2.
Use the flat end of the Black Stick to gently
disengage the Display BtB Connector from the
Main PCB as shown.
3.
Use the flat end of the Black Stick to gently
disengage the Battery BtB Connector from the
Main PCB as shown.
PAGE 37
Lenovo Confidential Restricted:
Do not share without consent from Lenovo
Advertisement
Table of Contents
