Table of Contents
Advertisement
Chapter 4 - ProxyServer Software
Clicking the Advanced tab brings up the parameters that affect all of the WAN links.
The ProxyServer is capable of performing MultiLink Point-to-Point Protocol (MLPPP). MLPPP
provides the opportunity for greater bandwidth by bundling WAN port links. Check MultiLink PPP
(MLPPP) to enable this option if your ISP provides this support.
Note: In order for link bundling to take place, you need to make sure that the User Name and
Password of all the WAN port links are the same. Verify and or/change using the individual WAN
tabs.
If the Need to Dial Out Initially option is enabled (default) the ProxyServer will dial up on the WAN
link(s) upon start up. If this option is disabled, then the ProxyServer will wait to dial until the first dial
request has been made.
The Message Printing Control group is used to flag specific items for generating messages on
various conditions, including Printing, Alarm, NCP (NetWare Core Protocol), and LCP (Link Control
Protocol) messages. These messages can be useful as troubleshooting tools, however, it is
recommended that under normal circumstances, all items should be disabled to avoid degradation of
ProxyServer performance.
31
Advertisement
Table of Contents
