Chapter 2 - Activation And Installation; Step 1 - Activate Your Wireless Account; Step 2 - Insert The Sim Card Into The Holder - Multitech MultiModem MTCBA-G-F1 User Manual

Chapter 2 – Activation and
Step 1 – Activate Your Wireless Account
Pre-Configured Multi-Tech Products
Each Multi-Tech wireless product has been pre-configured to operate on a wireless network.
Activate Your Wireless Account
Please see the wireless account Activation Notices located on the MultiModem CD. Choose the one for your
wireless network provider and follow the directions to activate your account.
Phone Numbers for the Wireless Modem
Every wireless modem will have its own unique phone number. The phone number may simply be given to you
by your wireless service provider or it may be on the SIM card or both. Wireless provider implementations may
vary.
Step 2 – Insert the SIM Card into the Holder
The wireless MultiModem requires the power supply connection to begin operation. It also requires a SIM card
(Subscriber Identity Module) to operate on a GSM network. To install the modem, do the following:
1. Using your fingernail or a small wedging tool (e.g., a small screwdriver), pry off the SIM cover.
2. Insert the SIM card into the holder.
3. Verify that the SIM card fits into the holder properly and then replace the cover.
Multi-Tech Systems, Inc. MultiModem GPRS Wireless Modem User Guide
Installation
Chapter 2 – Activation and Installation
9