Heating After A Long Time Of Inactivity/During First Use - Silvercrest SEMS 1100 B2 Operating Instructions Manual

Heating after a long time of inactivity/during first use
If you have not used it for some time, preheat the appliance as follows:
1) Fill the water tank 5 with tap water.
2) Place either the large o or the small espresso sieve p in the sieve holder i:
–
Make sure that the small indentation on the large o or small espresso
sieve p is located above the indentation on the sieve holder i when
inserted.
–
Then turn the large o or small espresso sieve p slightly to ensure it
cannot fall out.
NOTE
Wait until the espresso sieve o p has cooled down before taking it out!
►
In order to remove the espresso sieves o p from the sieve holder i, turn
►
the inserted espresso sieve o p until the indentation on the espresso
sieve i o is located directly above the indentation on the sieve holder i.
You can now remove the espresso sieve o p.
SEMS 1100 B2
GB │ IE │
35 ■