Multitech CommPlete 4000 Quick Start Manual page 15

Communications server

Hide thumbs Also See for CommPlete 4000:

Table of Contents

Getting Started with RASExpress

B10. Using Telnet for access requires that a TCP/IP protocol stack be loaded on the client PC.

Telnet access is possible both by dialing in through the RASExpress server and, more

commonly , through the LAN or Internet.

Figure 9. Setup for completing RAS Express configuration from client PC

At a client PC connected to the LAN in which the CommPlete 4000 is the RAS server, start a

Telnet session using either dial-in access or TCP/IP access.

CommPlete 4000 Communications Server Quick Start Guide

Table of Contents

Need help?

Do you have a question about the CommPlete 4000 and is the answer not in the manual?

Isi5634upci/4