Multitech MultiVOIP MVP210 Supplementary Manual page 4

Cabling Guide
Safety Recommendations for Rack Mounting (continued)
•
Ensure that the MultiVOIP is properly connected to earth ground via a grounded power
cord. If a power strip is used, ensure that the power strip provides adequate grounding
of the attached apparatus.
•
Ensure that the mains supply circuit is capable of handling the load of the MultiVOIP.
Refer to the power label on the equipment for load requirements.
•
Maximum ambient temperature for the MultiVOIP is 60 degrees Celsius (140° F) at 20-
90%s non-condensing relative humidity.
•
This equipment should only be installed by properly qualified service personnel.
•
Only connect like circuits. In other words, connect SELV (Secondary Extra Low
Voltage) circuits to SELV circuits and TN (Telecommunications Network) circuits to TN
circuits.
•
To reduce the risk of shock, all access doors should be closed during normal operation
of the equipment.
Package Contents: MVP-410/810 Models
•
One 4-port or 8-port MultiVOIP Analog or MultiVOIP SS or MultiVOIP FX unit
•
One power cord
•
One Command Cable (DB25-to-DB9 connectors)
•
Two rack mount brackets and four mounting screws
•
One printed Cabling Guide
•
One MultiVOIP CD containing software and user documentation.
Package Contents: MVP210 Models
•
One 2-port MultiVOIP unit (MVP210 or MVP210-SS or MVP 210-FX)
•
One two-part power cord
•
One Command Cable (DB9-to-RJ45 connectors)
•
One printed Cabling Guide
•
One MultiVOIP CD containing software and user documentation.
4 Multi-Tech Systems, Inc.