Beko WTE10746CHT1 User Manual page 3

Table of Contents

Advertisement

Laundry stained with Liquid cooking oil, acetone, alcohol, petrol, kerosene,
u
spot removers, turpentine, waxes and wax removers must be washed in hot
water with plenty of detergent beforehand. After the washing programme,
it can be used in the Refresh programme or in the Wash&Wear auxiliary
function selection.
Foam rubber (latex foam), shower caps, waterproof textiles, clothes or
u
pillows with rubber support or rubber foam pads must not be used in the
Wash&Wear auxiliary programme selection or in the Refresh programme. It
may cause fire risk.
If you use washing ball, detergent scale, laundry clothing cages and balls
u
in your machine, they can melt during drying. Do not use it in the Refresh
programme or in the Wash&Wear auxiliary function selection. It may cause
fire risk.
If you are using industrial chemicals for cleaning, never use the Refresh
u
programme or the Wash&Wear auxiliary programme. It may cause fire risk.
Do not touch loading door glass with bare hands after drying. There is the
u
risk of getting burnt.
In the Refresh programme and the Wash&Wear auxiliary programme
u
selection, there is a cooling process as the final step to make sure that the
laundry remains at a temperature that will not harm the user. You may be
exposed to hot steam if you open the door before cooling is complete. There
is the risk of scalding.
If the programme is interrupted (programme cancellation or power failure)
u
during the Refresh programme or the Wash&Wear auxiliary function
selection, the laundry in the machine may be hot. Be careful.
During the Refresh programme or the Wash&Wear auxiliary programme
u
selection, do not stop the machine before these steps are complete. If you
have to stop the machine, remove all laundry and lay them in a suitable
place to let them cool down.
Your product is suitable to operate in ambient temperatures between 0
u
and +35
C.
O
Ambient temperatures between 15
u
your product.
Do not let pets enter the product. Check inside the product before using.
u
Do not operate the Refresh programme and the Wash&Wear programme
u
after overloading the machine. Observe the maximum load levels specified.
Leather laundry and laundry that contains leather must not be used in
u
the Refresh programme and the Wash&Wear auxiliary function selection.
Leather parts give away colour.
3 / EN
C and +25
C are ideal temperatures for
O
O
O
Washing Machine / User's Manual
C

Advertisement

Table of Contents
loading

Table of Contents