Table of Contents
Advertisement
4.3.8.2 Functions/Programmes Selected by Pressing the Function Keys for 3 Seconds
• Drum Clean+
Press and hold the auxiliary function button 1 for 3 seconds to select the programme. Use regularly (once
in every 1-2 months) to clean the drum and provide the required hygiene. Steam is applied before the
programme to soften the residues in the drum. Operate the programme while the machine is completely
empty. To obtain better results, put powder lime-scale remover for washing machines into the detergent
compartment no. "2". This programme contains a drying step that runs after the drum cleaning step to dry the
inside of the machine.
C
This is not a Laundry washing programme. It is a maintenance programme.
Do not run this programme when there are any objects in the machine. If you try to do so, the machine detects that there is a
load inside and aborts the programme.
• Anti-Crease+
This function is selected when the spin selection button is pressed and held for 3 seconds and the programme
follow-up light for the relevant step turns on. When selected, it aerates the laundry for up to 8 hours at the end
of the programme to prevent creasing. You can cancel the programme and take your laundry out at any time
during the 8-hour duration. Press the function selection key or the machine on/off key to cancel the function.
The programme follow-up light will remain on until the function is canceled or the step is complete. If the
function cannot be cancelled, it will be active in the subsequent washing cycles as well.
• Steam
This function is selected when the auxiliary function button 2 is pressed and held for 3 seconds.
Use this programme to reduce the creases and ironing times of a small amount of unspotted cotton, synthetic
or mixed laundry.
C
When you activate the steam function, do not use liquid detergent if the product does not have a liquid detergent cup or liquid
dosing function. Otherwise, stains might remain on the clothes.
• Child lock
Use Child Lock function to prevent children from tampering with the machine. Thus you can avoid any changes
in a running programme.
C
You can switch on and off the machine with On / Off button when the Child Lock is active. When you switch on the machine
again, programme will resume from where it has stopped.
When the Child Lock is enabled, an audio warning will be given if the buttons are pressed. Audio warning will be cancelled if
the buttons are pressed five times consecutively.
To activate the Child Lock:
Press and hold Auxiliary Function button 3 for 3 seconds. After the countdown as "3-2-1" on the
display is over, child lock symbol appears on the display. When this warning is displayed, you can release the
Auxiliary Function button 3.
To deactivate the Child Lock:
Press and hold Auxiliary Function button 3 for 3 seconds. After the countdown as "3-2-1" on the display
is over, child lock symbol disappears.
• Bluetooth 3''
You can use the bluetooth connection function to pair your machine with your smart device. This way, you can use your smart
device to get information about your machine and control it.
To activate bluetooth connection:
Press and hold Remote Control function button for 3 seconds. Countdown "3-2-1" will be displayed,
and then Bluetooth icon will appear on the display. Release Remote Control function button. The bluetooth
icon will flash while the product is pairing with smart device. If connection is successful, icon will remain on.
23 / EN
Washing Machine / User's Manual
Advertisement
Table of Contents
