Njoy Garun Series Installation Manual page 6

Step 8
Make sure the cables are
correctly connected on each
side.
10
Front
of the
cabinet
Left side view
Front
of the
cabinet
Right side view
8.1
Slide the top lid back on and
secure it in place.
Step 9
Switch the power to ON. The EBM is now active and functioning.
NOTE!
If you want to use only one battery string (10 + 10) x1, please populate
with batteries only the bottom tray (JD1-JD7 batteries on the right side,
respectively JS1-JS7 on the left side). In the middle, just put the batteries
from MD1 to MD3 on the right side, respectively MS1 - MS3 on the left side.
Follow the same steps for connecting the cables. Will you use only a black
cable, one red cable and the two blue cables bounded to the cabinet. Please
connect the blue cables bounded to the cabinet to MR3 (-, black) battery
terminal on the right side, respectively ML3 (+, red) terminal on the left side
(you will no longer use the short blue cables no. 7).
Front
of the
cabinet
Left side view
11