HighPoint RocketMate 110 Quick Installation Manual

Usb-c 3.2 20gb/s to m.2 nvme enclosure

Advertisement

RocketMate 110
USB-C 3.2 20Gb/s to M.2 NVMe Enclosure
Quick Installation Guide
V1.00

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RocketMate 110 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for HighPoint RocketMate 110

  • Page 1 RocketMate 110 USB-C 3.2 20Gb/s to M.2 NVMe Enclosure Quick Installation Guide V1.00...
  • Page 2 Table of Contents Introducing the HighPoint RocketMate 110 ..........2 Kit Contents ..................... 2 System Requirement ................2 Board Layout .................... 3 Hardware Installation................4 Customer Support ..................7...
  • Page 3 The RocketMate 110 is a stand-alone, single-bay external M.2 NVMe enclosure designed for use with USB 3.2 20G connectivity. The RocketMate 110 can be connected to any industry standard USB 3.2 controller or HBA, such as the HighPoint RocketU 1411C, RocketU 1444C, or RocketU 1488C, using the included 20G USB Type-C to Type-C cable.
  • Page 4 Board Layout LED Indicator USB 3.2 LED Indicator Status Connect to computer(with power supply) Solid Blue Drive idle Solid Blue Drive activity Flash Blue Sleep mode No light Drive “Safely Remove” No light Hard drive M.2 M-Key port screws 2280 Supported SSD Form Factor:...
  • Page 5 Hardware Installation 1. Remove the top panel by unscrewing the 4 screws shown below (requires a Phillips screwdriver): 2. To install M.2 NVMe SSD’s: 01. Remove the screws (shown below). 02. Carefully insert each M.2 SSD into the slot. 03. Fasten down each SSD using the screws removed in step “01”.
  • Page 6 Note: Make sure the SSDs are carefully, but securely installed into each M.2 port. Loose connections can cause a variety of stability and performance issues, and may ultimately result in data loss. 3. Align the top panel and secure it to the enclosure using the screws removed in step 1.
  • Page 7 4. Connect the enclosure to the host platform using the included USB Type-C to Type-C cable. USB-C Port...
  • Page 8 Customer Support If you encounter any problems while utilizing this or any other HighPoint Technologies, Inc. product, feel free to contact our Customer Support Department. Web Support: https://www.highpoint-tech.com/support-and-services HighPoint Technologies, Inc. websites: https://www.highpoint-tech.com © Copyright 2021 HighPoint Technologies, Inc. All right reserved.

Table of Contents