Table of Contents
Advertisement
The unit must be transported upright to avoid spilling fuel. Do not lie down or turn over the
machine.
Secure or attach the unit with the lift handle to prevent the machine from slipping or tipping over.
When transporting, towing in a vehicle, secure the machine securely and keep it level to avoid spilling
fuel, do not put it down and do not put anything on the machine
The machine may fall and cause damage or injury if improperly lifted. Rise with the
handles at the base of the plate.
8. TROUBLESHOOTING
Problem
1
ENGINE DOES NOT START
2
ENGINE STOP
3
ENGINE POWER LOSS
4
WATER STOPS TO FLOW
5
INSUFFICIENT VIBRATION
6
THE MACHINE DOES NOT MOVE
FREELY
CAUSES AND SOLUTIONS
CHECK ON / OFF SWITCH TO MAKE SURE IT
IS ON
VERIFY FUEL SUPPLY
IF A DIESEL ENGINE (GASOLINE) IS
INSTALL, CHECK THE STARTER OIL AS AN OIL
SENSOR IS INSTALLED ON THESE ENGINES
THAT PREVENTS STARTING AND STARTS
THE ENGINE WHEN THE OIL LEVEL IS TOO
LOW.
MAKE SURE THE SPARK PLUG IS
CONNECTED
CHECK THE INJECTOR AND CARBURETOR
BOWL TO ENSURE THAT THEY ARE CLEAN.
VERIFY FUEL SUPPLY
CHECK THAT THE FUEL TAP IS OPEN
VERIFY THE AIR FILTER
VERIFY THE CONDITION OF THE AIR
FILTER
VERIFY THE SPARK PLUG
NOT ENOUGH WATER
BLOCKING IN THE WATER PIPE
CHECK WHETHER THE V-BELT SLIDES
CHECK THAT THE ENGINE RUNS AT 3500 TRS
/ MIN
CHECK THE BOTTOM OF THE PLATE IF
THERE MATERIALS
18
Advertisement
Table of Contents
