Wireless Settings; Figure 9: Wireless Settings Screen - Hitron CGNV User Manual

Residential cable modem

Table of Contents

Table 6:

LAN Settings Screen (continued)

DHCP End IP

2.4

Wireless Settings

Use this screen to configure the CGNV's wireless network.

Click Next in the Setup Wizard: LAN Settings screen. The following screen

displays.

Figure 9:

Wireless Settings Screen

Version 4.2.7.2, 05/2014. Copyright

Use this field to specify the IP address at which the

CGNV stops assigning IP addresses to devices on the

LAN (when DHCP is enabled).

NOTE:

Devices requesting IP addresses once the

DHCP pool is exhausted are not assigned an IP

address.

Click this to return to the previous screen.

Click this to continue to the next screen.

Hitron CGNV User's Guide

2012 Hitron Technologies

2014 Hitron Technologies

SETUP WIZARD

Table of Contents