Table of Contents
Advertisement
Telephone FC755D1
General
The telephone can be installed on a desktop or a bulkhead. Select a location where the
telephone can easily be operated.
• For installation on a wooden table, use the mounting base and self-tapping screws
(supplied).
• For installation on a steel table, fix the telephone with nuts and bolts.
• For bulkhead mounting, use the bulkhead mounting base (supplied with telephone
accessories).
Mounting location
Select a location where temperature and humidity are moderate and stable. Secure
sufficient space around the unit for ease of operation and maintenance.
Mounting
The mounting dimensions are given in
the outline drawing at the back of this
manual. Determine the mounting location,
leaving sufficient space around the unit,
and then fix the mounting base to the
mounting location. The mounting base is
different for bulkhead and desktop
mounting, however the mounting
procedure is the same for all.
1. Fix the mounting base to the
mounting location with four
self-tapping screws (4x16).
2. On the underside of the telephone,
unfasten the screw shown in the
figure. (The screw may be
discarded.) Attach vulcanizing tape
(supplied) to the handset fixture.
Fasten the handset fixture to the
underside of the telephone with a
screw (3x14, supplied).
3. The catch in the receiver cradle
functions to hang up the handset
completely. Set the catch in the
upward position as shown in left. (To
detach the handset from the hanger,
slide the handset upward.)
Mounting base
(Desktop: Use installation materials,
Bulkhead: Use telephone accessories.)
Catches
Mounting base stopper
34
Secure mounting
base with tapping
screws.
Attach handset
fixture here.
Unfasten this screw.
Bottom view
Handset fixture
Catch
Advertisement
Table of Contents
