Tuning To A Channel - Motorola HDT101 User Manual

Tuning to a Channel

Use either of the following methods to tune to a channel:
Press the and
desired channel.
Enter the channel number using the number keys.
You cannot tune to a sub-channel using the number keys on your remote
control. You must first enter the channel number and then use the
keys to tune to the sub-channel you wish to view.
If sub-channels exist within a channel, the sub-channel numbers are
shown with a dash after the channel number. In the sample screenshot
on page 25, channel 5 has two sub-channels, labeled 1 and 2. Channel
5, sub-channel 2, is displayed.
You cannot tune to a sub-channel using the number keys on your remote
control. You must first enter the channel number and then use the
keys to tune to the sub-channel you wish to view.
To quickly navigate to the channels you view most often, set those
channels as Favorites. See "Selecting a Favorite Channel" on page 25.
arrow keys on your remote control to navigate to the
22
and
and