Motorola HDT101 User Manual page 49

Connecting your A/V Receiver, VCR, and Stereo TV
1
Connect a coaxial cable to the
and the
SPDIF
When using the digital audio output (
baseband audio connections from the HDT101 to the A/V receiver
are not needed.
2
Connect a video cable to the
the /
CABLE TV VIDEO
If your equipment supports it, S-Video connections may be used in
place of the standard composite video connections. In most cases,
S-Video offers a higher level of standard-definition video quality than
composite video.
3
Connect a stereo audio cable to the
connectors on the A/V receiver and the
connectors on the stereo VCR.
4
Connect a stereo audio cable to the
connectors on the stereo VCR and the
connectors on the A/V receiver.
5
Connect a video cable to the
VCR and the
6
Connect a video cable to the
VCR and the
7
Connect a video cable to the
and the /
TV MONITOR OUTPUT VIDEO
To switch between viewing input from your VCR and input from your
HDT101, change your A/V receiver's video inputs.
input connector on the A/V receiver.
VIDEO
connector on the A/V receiver.
INPUT VIDEO
connector on the A/V receiver.
VIDEO VCR OUT
OUTPUT VIDEO
connector on the A/V receiver.
VIDEO VCR IN
INPUT VIDEO
/ connector on the HDT101
S PDIF OUT
/ ), the left/right
S PDIF OUT
connector on the HDT101 and
VCR AUDIO OUT R
INPUT AUDIO R
OUTPUT AUDIO OUT R
VCR AUDIO IN R
connector on the stereo
connector on the stereo
connector on the stereo TV
connector on the A/V receiver.
43
and
L
and
L
and
L
and
L