tams elektronik S88-3 Manual page 17

English
§
if the kit is assembled and soldered poorly, or if damage is caused
by not following the instructions in this manual,
§
if the ready-built module has been altered and repair attempts have
failed,
§
if arbitrary changes in the circuit are made,
§
if components are removed or swapped, or wiring is added or
removed in any other way as layed down in the original design,
§
if parts other than the originals delivered with this kit are used,
§
if the copper tracks or soldering eyes are damaged,
§
when components are mounted incorrectly, or if the components or
the circuit are poled incorrectly, also subsequent damage resulting
from these faults,
§
if damage occurs due to an overload of the module,
§
if connected to a incorrect voltage or current,
§
if damaged by other persons,
§
if damaged by faulty operation or if damaged by careless use or
abuse,
§
if damaged
discharging of the hands.
The asterisks **
This manual mentions the following company:
Gebr. MÄRKLIN** & Cie. GmbH
Postfach 8 60, D-73008 Göppingen
Page 32
by touching components before
S88-3
electrostatic