Check List For Troubleshooting; Manufacturer's Note, Ce And Warranty - tams elektronik S88-3 Manual

English

8. Check list for troubleshooting

§
Parts are getting too hot and/or start to smoke.
!
Switch off the digital system immediately !
Possible cause: one or more components are soldered incorrectly.
à Perform a visual check.
§
The central unit / the memory unit / the interface unit do not show
the proper status.
Possible cause: The connection(s) between the feedback module
and feedback modules connected in series / the digital device is /
are interrupted. à Check the connections. When using a ribbon
cable, check as well, if the connecting socket of the ribbon cable
are put on in the right direction.
Possible cause: The connection between the input and the rail
contact is interrupted. à Check the connections.
Hotline
If problems with your module occur, our hotline is pleased to help you.
(address on the cover page).

9. Manufacturer's note, CE and Warranty

Manufacturer's note
The person who builds this kit or brings the circuit into operation is the
manufacturer of the product. If he sells the product to another person
he is responsible for passing on all the relevant papers. Domestic
appliances assembled from a kit are deemed industrial products and
must comply with health and safety regulations.
Page 30
S88-3