Using The Precision Clean Pocket Accessory; Using The Total Clean Pocket Accessory - Shark S4701D Owner's Manual

Using Your Handheld Steamer - continued
CAUTION: Make sure the Steam Mop is
unplugged or in Standby Mode while
attaching or removing the Accessory Hose
from the Steam Nozzle.
Handheld Steamer
fig. 11
fig. 12
NOTE: Some accessories may not be included with your
product. See box for specific product details.
3
First attach the Accessory Hose to the Handheld
Steamer by snapping the Accessory Hose into the
Steam Nozzle (fig. 11).
4
Select the desired cleaning accessory. Follow
the Accessory sub-assembly instructions (pages
16–18). Then insert the Direct Steam Nozzle into the
Accessory (fig. 12).
15 1-800-798-7398
Accessory Release
Accessory Hose
Hose Release Button
Steam Duster Accessory
EZ Reach Bending Duster Accessory
Scrub Blast Accessory
Total Clean Pocket Accessory
Precision Clean Pocket Accessory
Flat Scrubber Accessory
5
To remove the Accessory Hose, press and hold
down the Hose Release Button, then slide out the
Accessory Hose.
Buttons
Direct Steam

USING THE PRECISION CLEAN POCKET ACCESSORY

Nozzle
Cleaning Tip: The Precision Clean Pocket Accessory is
ideal for small, uneven surfaces. The pointed tip is great for
edges and corners.
CAUTION: Make sure the Steam Mop is
unplugged or in Standby Mode while attaching
or removing the Precision Clean Pocket
Accessory. Avoid touching the Accessory, as it
will be very hot after steaming.
CAUTION: To avoid scalding injuries, always unplug
and allow the Steam Mop to cool before removing
or changing Accessories or Cleaning Pads.
CAUTION: Do not use on wallpaper.
1
Slide the Precision Clean Pocket Pad over the
Precision Clean Pocket Accessory so it fits snuggly.
2
Cinch the elastic band and slide the locking toggle
to tighten.
3 Attach the Precision Clean Pocket Accessory by
connecting it to the Direct Steam Nozzle until it clicks
into place.
4
When you press the Steam Control Button Accessory
Mode (ACCESSORY) will automatically be selected
and you can begin cleaning (LO and HI Settings are
not available for above-floor cleaning).
5
To remove the Precision Clean Pocket Accessory,
squeeze the Accessory Release Buttons, then slide
out the Accessory.

USING THE TOTAL CLEAN POCKET ACCESSORY

Cleaning Tip: The Total Clean Pocket Accessory is ideal
for large, flat surfaces. The pointed tip is great for edges
and corners.
CAUTION: Make sure the Steam Mop is
unplugged or in Standby Mode while attaching
or removing the Total Clean Pocket Accessory.
Avoid touching the Accessory, as it will be very
hot after steaming.
CAUTION: To avoid scalding injuries, always unplug
and allow the Steam Mop to cool before removing
or changing Accessories or Cleaning Pads.
CAUTION: Do not use on wallpaper.
1
Slide the Total Clean Pocket Pad over the Total Clean
Pocket Accessory so it fits snuggly.
2
Cinch the elastic band and slide the locking toggle
to tighten.
3 Attach the Total Clean Pocket Accessory by
connecting it to the Direct Steam Nozzle until it clicks
into place.
4
When you press the Steam Control Button Accessory
Mode (ACCESSORY) will automatically be selected
and you can begin cleaning (LO and HI Settings are
not available for above-floor cleaning).
5
To remove the Total Clean Pocket Accessory,
squeeze the Accessory Release Buttons, then slide
out the Accessory.
www.sharkclean.com
EN
16