modway EEI-1109 Manual page 2

EEI-1109 & 3869 OFFICE CHAIR
STEP 1:
the Backrest (6)
1. Attach
Spring Washers (F) as shown.
2. Use Nut Driver (G) to tighten all Nuts (E) clockwise as shown.
STEP 2:
1. Put the Seater (7) on the the Seater Frame (5) as shown.
2. Carefully turn over the assembled Seater Frame (5) and make sure the holes of the Seater (7) are
aligned with the holes of the Seater Frame (5) as shown.
Customer Service 609-256-9000︱www.modway.com
to the Seater frame (5) by using 2 pieces of Nuts (E) and 2 pieces of
Page 2 of 4