Adjusting Network Settings - Motorola V60 User Manual

Making a Cable Connection
Installing the Software
To transfer data between your phone and computer, install
the software included with the Motorola Original data kit.
See the data kit's user's guide for more information.
Attaching the Cable
Use a Motorola Original serial cable or Motorola Original
USB cable to connect your phone to the external device.
Note: Not all devices are compatible with a cable
connection. Check your computer or hand-held device to
determine the type of cable you need.
Serial Cable
Action
1 Plug the serial cable into
the detachable head. Make
sure that the Motorola logo
on the detachable head and
the metal shielding on the
serial cable plug are both facing up.
2 With the
Motorola logo
and the phone
both facing up,
plug the
detachable head
into the phone's
accessory
connector port.
3 Plug the other end of the cable into the serial
interface connection on the device and tighten
the screws, if present.
USB Cable
Action
1 Plug the end of the
cable with the Motorola
logo into the phone's
accessory connector
port. Make sure that
the logo and the phone
are both facing up.
2 Plug the other end—the USB connection—into
the USB port on the external device.
Synchronize Data
You can synchronize phonebook and datebook information
between your phone and computer with Virtual Phone
software. See the Virtual Phone user's guide for more
information.

Adjusting Network Settings

Your service provider registers your phone to its
network. In some situations, such as using the
phone as a modem or connecting it to a TTY
device, you may need to change the network
registration.
Note: Some settings and/or options described in this
section may not be available for all phone models.
Viewing Currently Registered Network
M
Find the Feature
Your phone displays the network ID.
Finding a New Network
You may decide to switch to another network to improve
the calling conditions, because of network coverage or
roaming conditions.
M#*
Shortcut: Press
the strongest non-public network, or press
switch to a public or non-public network (whichever you
are not using). When you quick switch, your phone
switches back to the original network after the next
call, or after 1 minute, if you do not make a call.
To search for and select a new network:
M
Find the Feature
Press To
1 S
scroll to Non-Public , Use
Public
+
2 SEARCH (
) start a network search
If you choose Non-Public or Use Public , your
phone prompts you to register when it finds a
network:
-
YES
( ) register on the new network
or
NO +
( ) continue or cancel the search
If you choose Manual , your phone displays a list of
all available networks:
a S
scroll to the network you want
+
b VIEW (
) view network details
c REGISTER
register on the network
+
( )
If you choose Normal , your phone searches for
the strongest network .
> More > Settings
> Other Settings
> Network
> Current Network
to automatically register on
MN
to quick
> More > Settings
> Other Settings
> Network
> New Network
, Manual , or Normal
21