Supported Controller Cards - Cisco NCS 1004 Manual

Supported Controller Cards

Supported Controller Cards
Table 1: Feature History
Feature Name
NCS1K4-CNTLR-B-K9
Controller Card
The Cisco NCS 1004 supports the following controller cards:
• NCS1K4-CNTLR-K9
• NCS1K4-CNTLR-B-K9
Install Controller
This task has information about installing the controller into the chassis.
Step 1 Orient the controller correctly before inserting. Check for the This Side Up label.
Step 2
Supporting the controller at the bottom with one of your hands, slide the controller into the slot, using the handle.
Install Cisco NCS 1004 Modules
2
Release Information
Cisco IOS XR Release
7.5.1
The NCS1K4-CNTLR-K9 controller card supports a default of 115200 baud rate on the RS232 console
port and runs on BIOS version 4.20. The controller card has two USB 3.0, two 10/100/1000 Ethernet,
one RS232 console and one SFP ports. The SFP port of the controler card supports 1GE payload.
The NCS1K4-CNTLR-B-K9 controller card supports a default of 9600 baud rate on the RS232 console
port and runs on BIOS version 5.10. The controller card has two USB 3.0, two 10/100/1000 Ethernet,
one RS232 console and one SFP ports. The SFP port of the controler card supports 1GE payload.
Install Cisco NCS 1004 Modules
Description
NCS 1004 supports the NCS1K4-CNTLR-B-K9
controller card. The card supports a default of 9600
baud rate on the RS232 console port and runs on
BIOS version 5.10.