Table of Contents
Advertisement
1
Z5731 KSL Stacking frame
4
All manuals and user guides at all-guides.com
1.1 Scope of supply
The Z5731 KSL Stacking frame is equipped and supplied with the
following components.
Please verify the shipment for completeness and proper condition
of the items.
Weight
1.2 Safety precautions and intended use
In connection with KSL/KSLi-TOP groundstacks, the d&b Z5731
KSL Stacking frame is used to provide an adequate and stable
ground support for groundstack setups on top of applicable d&b
subwoofers or other suitable surfaces.
Always secure ground stacked setups against movement and
possible tipping over.
For this purpose, the stacking frame is equipped with dedicated
guide lugs [5], which accept a standard 60 mm (2.4") ratchet
strap.
Limitations:
Observe the maximum number of cabinets permitted: 6 x KSL/
KSLi-TOP.
▪ Installation and setup should only be carried out by qualified
▪
▪ Always carry out a visual and functional inspection of the items
Please also refer to Þ Chapter 3 "Care and maintenance"
on page 9.
Pos.
Qty.
Description
[1]
1
Z5731 KSL Stacking frame
Including:
[2]
6
Rubber feet
[3]
2
Locking pins type C, 10 x 35 mm
[4]
2
Locking pins type B, 10 x 45 mm
[5]
4
Guide lugs
Instruction label providing vital safety and
rigging instructions.
D2739.EN .01 Z5731 Rigging manual
WARNING!
Potential risk of personal injury and/or
damage to material!
and authorized personnel observing the valid national Rules for
the Prevention of Accidents (RPA).
before use. In case there is any doubt as to the proper
functioning and safety of the items, these must be withdrawn
from use immediately.
Z5731 KSL Stacking frame
30 kg/66 lb
d&b Z5731 Rigging manual 1.1 en
Advertisement
Table of Contents
