Alu-Se Calibration (User) - Fasep B222 User Manual

Fasep 2000 srl
Balatron 222/212: User's Manual
4.3

ALU-SE Calibration (USER)


NOTE technical calibration is only available for qualified personnel
Switch on the wheel balancer.
Press <SET> when SOF X.XX
(software version) is displayed.
ATTENTION select mode
CAL USR
Put the rod in 0 position (Fig. 17)
Put the rod in internal side of flange
(Fig.18)
Put the rod in the internal side of the
rim (Fig.19)
Select the wheel diameter
Press <MODE/ESC> to return to
normal balancing mode.
4-3
23 January 2020
F . 18
IG
F . 19
IG
F . 20
IG
Rev. 1.8