Agilent Technologies N9360A Programming Manual page 77

N9360A Multi UE Tester W-CDMA Programming Manual
Inner Loop Power (UpMax)
CONFigure:CONDition:LIMit:INNErpower:UpMAX <<
<real LO>,<real HI>
CONFigure:CONDition:LIMit:INNErpower:UpMAX?
This command sets the low and high limits for the test in each
band set by the Band
allowable range is from
preset, this is set to
0.00
This query command returns the set low and high limits of the
test with real separated by a comma. The range of the value is
same as that of the command parameter.
Inner Loop Power (10 Slots Down)
CONFigure:CONDition:LIMit:INNErpower:<<
10SlotsDown <real LO>,<real HI>
CONFigure:CONDition:LIMit:INNErpower:10SlotsDown
This command sets the low and high limits for the test in each
band set by the Band
allowable range is from
preset, this is set to
-13.00
This query command returns the set low and high limits of the
test with real separated by a comma. The range of the value is
same as that of the command parameter.
Inner Loop Power (10 Slots Up)
CONFigure:CONDition:LIMit:INNErpower:<<
10SlotsUp <real LO>,<real HI>
CONFigure:CONDition:LIMit:INNErpower:10SlotsUp?
This command sets the low and high limits for the test in each
band set by the Band
allowable range is from
preset, this is set to
+7.00
This query command returns the set low and high limits of the
test with real separated by a comma. The range of the value is
same as that of the command parameter.
Programming Command Reference
command described on
to (dB) in
-99.99 +99.99
(dB) and (dB).
+2.00
command described on
to (dB) in
-99.99 +99.99
(dB) and
-7.00
command described on
to (dB) in
-99.99 +99.99
(dB) and
+13.00
5
page 28. The
steps. At
0.01
page 28. The
steps. At
0.01
(dB).
page 28. The
steps. At
0.01
(dB).
5-31