Table of Contents
Advertisement
Replacing Components
Installing a Fan Module
Before you begin
• A fan slot must be open and ready for the new fan module to be installed.
• You must have a new fan module on hand and ready to install within one minute of removing the original
• The new fan module must have the same airflow direction as the other fan and power supply modules
Procedure
Step 1
Holding the fan module by its handle, align the back of the fan module (the side with the electrical connectors)
to the open fan slot in the chassis.
Step 2
Slide the fan module into the slot until it clicks in place.
fan module if the fabric interconnect is operating.
installed in the fabric interconnect.
Cisco UCS 6500 Series Fabric Interconnect Hardware Installation Guide
Installing a Fan Module
43
Advertisement
Table of Contents
