Connecting the Fabric Interconnect
Port Configuration
The following table shows the port types that can be configured. For port type definitions, see the preceding
section.
Chassis Port
1 through 32
9 and 10
1 through 36
33 through 36
Port Breakout
Port breakout is supported with the following configurations.
Port Speed
Supported Port Type
10G/25G/40G/100G
Native Ethernet
1G
Native Ethernet
25G/40G/100G
Native Ethernet
8G/16G/32G
Native FC
100G/40G/10G/25G
Native Ethernet
Cisco UCS 6500 Series Fabric Interconnect Hardware Installation Guide
Port Breakout
• Ethernet Uplink Port
• FCoE uplink port
• Appliance port
(EHM only)
• Monitor Port
Ethernet Uplink Port
Server Ports
• FC uplink port
• FC Storage port
Note
All 4 FC
Breakout Ports
of a QSFP port
must be
configured at
32G, 16G, or
8G. So, in
other words,
FC breakout
ports of the
same QSFP
port cannot
have different
speeds.
• Ethernet Uplink Port
• Server port
• FCoE uplink port
• Appliance port
(EHM only)
• Monitor Port
31