Table of Contents
Advertisement
Replacing Components
The airflow baffle is held in place by adhesive, so just apply enough force to break the adhesive.
Step 5
Remove the faceplate.
a) Using a #2 Phillips screwdriver, remove 15 countersink screws.
b) Slide the faceplate off of the fabric interconnect.
Step 6
Remove the PSU baffles.
a) Using a #2 Phillips screwdriver, remove four screws (2 screws per baffle.)
b) Grasp each baffle and lift it off of the PCBA.
Cisco UCS 6500 Series Fabric Interconnect Hardware Installation Guide
Recycling the PCBA
49
Advertisement
Table of Contents
