Table of Contents
Advertisement
20
1
2
3
21R
6
ASSEMBLY STEP 1
STEP 1 HARDWARE :
1
2
Bolt
Spring Washer
M8
Ø8.2
Qty: 4
Qty: 4
1.1 Open hardware for Step 1.
1.2 Attach the Front Stabilizer (21F) and Rear
Stabilizer (21R) to the Main Frame (20) using
4 Bolts (1), 4 Spring Washers (2) and 4 Flat
Washers (3), and tighten firmly.
21F
STEP 2.2
3
Flat Washer
24
Ø8.2
Qty: 4
23
26
ASSEMBLY STEP 2
2.1 Turn Adjustment Knob (22) counter-clockwise to
fully loosen.
2.2 Attach Lead Wire (24) to Console Cable (23)
26
and pull Console Cable (23) from Head Tube
22
(25) through Handlebar Post (26) and out hole
24
in front of Handlebar Post (26).
23
2.3 Insert Handlebar Post (26) into Head Tube (25)
25
and tighten Adjustment Knob (22) to secure.
2.4 Allow enough Console Cable (23) to hang out of
Handlebar Post (26) for Assembly Step 4.
2.5 Detach and discard Lead Wire (24).
NOTE: Be careful not to pinch any wires while
assembling handlebars.
7
Advertisement
Table of Contents
