Table of Contents
Advertisement
<TIMER PROGRAM SETTINGS>
TIMER PROGRAM SETTINGS
Up to 3 most used operation patterns can be set in ad-
vance. By individually setting the camera, recording inter-
vals and recording picture quality for normal recording/alarm
recording to A - D, settings can be changed instantly by
switching operations.
Before recording, accurately set the date and
current time (for setting the date and time,
page 20).
TIMER PROGRAM
Structure of the <TIMER PROGRAM> screen
1) 2)
<TIMER PROGRAM>
DW
>>1 ---
2 ---
3 ---
4 ---
5 ---
6 ---
7 ---
8 ---
SPL
9)
1) PROGRAM NUMBER
Up to 8 programs can be set for a single operation.
2) DW
The day of week from "SUN" to "SAT" can be set.
"DAY" : When recording at the same time daily.
"SPL" : When recording the period specified in "9) SPL (spe-
cial day of the week setting)" below.
"HOL" : When setting holidays specified in the <HOLIDAY
SETTING> screen.
3) REC START TIME
The time is indicated using the 24-hour system.
If there is an overlap in the reservation time, the
program with the larger program number is given
priority for recording.
4) NEXT DAY
A period appears between the START and END time when
recording carries over to the following day.
5) REC END TIME
6) MODE
"A" - "D" : When recording using the camera operation type
and recording intervals set in "REC MODE A" - "REC MODE
D" of the <TIMER PROGRAM SETTINGS> screen (for
details concerning REC mode settings,
21, 22).
"SKIP" : When temporarily skipping timer recording (the
recording will not be made for the specified time frame of
that program number).
7) M-DET
The motion detection function can be set ON/OFF.
8) Select timer setting number (P1 - P3) is displayed.
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
40
3)
4) 5)
6)
7) 8)
P1
START END
MODE M-DET
--:-- --:-- ---- ---
--:-- --:-- ---- ---
--:-- --:-- ---- ---
--:-- --:-- ---- ---
--:-- --:-- ---- ---
--:-- --:-- ---- ---
--:-- --:-- ---- ---
--:-- --:-- ---- ---
SAT-SUN
see pages
9) SPL (special day of the week setting)
The start day of the week and end day of the week are set.
When selecting "SPL" in "DW", the period from the start
day of the week and end day of the week set here are
active.
Example : Using program 1 in <TIMER PROGRAM> P2,
REC MODE A will record to Wednesday - Saturday from
12:30 to 13:00 and "M-DET" is set to "ON".
see
1. Press the SET UP button
PROGRAM SETTINGS> screen.
<TIMER PROGRAM SETTINGS>
>>SELECTED PATTERN
HOLIDAY SETTING
REC MODE A
REC MODE B
REC MODE C
REC MODE D
ALARM REC DURATION
PRE ALARM REC
2. Check to see that the cursor is to the left of "SELECTED
PATTERN" and turn the SHUTTLE ring clockwise twice.
• The "P1" display reverses in color when the SHUTTLE ring
is turned the first time. When the ring is turned for the second
time, the background turns red and flashes.
3. Turn the JOG dial to select "P2" and turn the SHUTTLE ring
clockwise.
• The setting is confirmed and flashing stops.
4. Turn the JOG dial clockwise to reverse display "SET" and
turn the SHUTTLE ring clockwise.
• The <TIMER PROGRAM> screen appears.
<TIMER PROGRAM>
DW
>>1 ---
2 ---
3 ---
4 ---
5 ---
6 ---
7 ---
8 ---
SPL
5. Check to see that the cursor is to the left of program number
"1" and turn the SHUTTLE ring clockwise twice.
• The "DW" display reverses in color when the SHUTTLE ring
is turned the first time. When the ring is turned for the second
time, the background turns red and flashes.
6. Turn the JOG dial to display "SPL" in "DW" and turn the
SHUTTLE ring clockwise.
• The setting is confirmed and flashing stops.
When selecting the wrong day of the week in
error, turn the SHUTTLE ring clockwise, use the JOG
dial to display the correct day of the week and turn
the SHUTTLE ring clockwise again.
7. Turn the JOG dial clockwise to move the reversed display
to the "hour" of the start time and turn the SHUTTLE ring
clockwise.
• The background of the "hour" of the START changes to red
and flashes.
8. Turn the JOG dial to display "12 " in the "hour" and turn the
SHUTTLE ring clockwise.
• The setting is confirmed and flashing stops.
<SETTINGS>
Select <TIMER
}
}
P1-SET
NORMAL & ALARM-SET
NORMAL & ALARM-SET
NORMAL & ALARM-SET
NORMAL & ALARM-SET
5S
SHORT
P2
START END
MODE M-DET
--:-- --:-- ---- ---
--:-- --:-- ---- ---
--:-- --:-- ---- ---
--:-- --:-- ---- ---
--:-- --:-- ---- ---
--:-- --:-- ---- ---
--:-- --:-- ---- ---
--:-- --:-- ---- ---
SAT-SUN
Advertisement
Table of Contents
