<HDD SETTINGS>
>>HDD REPEAT REC
HDD REPEAT PLAY
IM-CHECK PLAY
SEQUENTIAL PLAY
If not overwriting data on the first unit (when the
remaining capacity becomes less than 20%), set
"HDD REPEAT REC" of the first unit to "OFF".
2. Press the SET UP button
UP/INFORMATION>
4" ( ) in the <REAR TERMINAL SETTINGS> screen. Display
the "REMAIN" and confirm.
•
: Set the number of the connected MODE OUT terminal.
When not overwriting data on the first unit, this
setting is not required for the second unit.
3. Display "HDD-20%" in "REMAIN HDD" of the same screen
and confirm.
<REAR TERMINAL SETTINGS>
MODE OUT 1
MODE OUT 2
MODE OUT 3
MODE OUT 4
KEY SOUND
BUZZER
>>REMAIN HDD
CALL OUT SETTINGS
EMERGENCY REC DURATION
If not overwriting data on the first unit (when the
remaining capacity becomes less than 20%), this
setting is not required for the second unit.
4. Turn the SHUTTLE ring counterclockwise or press the SET
UP button.
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Operations
STANDBY
OFF
OFF
OFF
<SETTINGS>
<INITIAL SET
}
}
Select "MODE OUT 1" ~ "MODE OUT
}
REMAIN
REMAIN
REMAIN
REMAIN
ON
OFF
HDD-20%
10M
55