Table of Contents
Advertisement
9. Repeat steps 7 and 8 to set "30" in "minutes" of the start
time and "13" in the "hour" and "00" in the "minutes" of the
end time, and then confirm.
10. Turn the JOG dial clockwise to move the reversed display
to the "MODE" and turn the SHUTTLE ring clockwise.
• The background of the "MODE" setting turns red and flashes.
11. Turn the JOG dial to display "A" in "MODE" and turn the
SHUTTLE ring clockwise.
• The setting is confirmed and flashing stops.
12. Turn the JOG dial clockwise to move the reversed display
to the "M-DET" and turn the SHUTTLE ring clockwise.
• The background of the "M-DET" setting turns red and flashes.
13. Turn the JOG dial to display "ON" in "M-DET" and turn the
SHUTTLE ring clockwise.
• The setting is confirmed and flashing stops.
14. When input timer reservations in other program number,
repeat steps 5 - 13.
15. Turn the JOG dial to select "SPL" and turn the SHUTTLE
ring clockwise twice.
• The "start day" display reverses in color when the SHUTTLE
ring is turned the first time. When the ring is turned for the
second time, the background turns red and flashes.
16. Turn the JOG dial to display "WED" in start day and turn
the SHUTTLE ring clockwise.
• The setting is confirmed and flashing stops.
17. Turn the JOG dial clockwise to move the reversed display
to the end day and turn the SHUTTLE ring clockwise.
• The background of the end day setting turns red and flashes.
18. Turn the JOG dial to display "SAT" in end day and turn the
SHUTTLE ring clockwise.
• The setting is confirmed and flashing stops.
<TIMER PROGRAM>
DW
>>1 SPL
2 ---
3 ---
4 ---
5 ---
6 ---
7 ---
8 ---
SPL
19. Turn the SHUTTLE ring counterclockwise or press the SET
UP button.
INFORMATION
Recording will not be performed if there is an error in the setting. To prevent such errors for timer recording,
this unit notifies errors using methods shown below. If there is an error in the setting, take the necessary
procedures shown below.
Unit status
TIMER button flashes.
Series of short beeps
(beep-beep-beep)
will sound.
Timer recording is not
performed even when
the timer recording
time is reached.
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Operations
P2
START END
MODE M-DET
12:30 13:00 A
ON
--:-- --:-- ---- ---
--:-- --:-- ---- ---
--:-- --:-- ---- ---
--:-- --:-- ---- ---
--:-- --:-- ---- ---
--:-- --:-- ---- ---
--:-- --:-- ---- ---
WED-SAT
Description of error
1) The date/time is not set.
2) Timer reservation setting
has not been set to operate.
3) Program is currently being set.
1) "HDD REPEAT REC" in
<HDD SETTINGS> is
set to "OFF" or "STANDBY".
There is no HDD space left.
• Turn the SHUTTLE ring counterclockwise to return the
cursor to the previous operation. Then, press the SET UP
button to clear the <TIMER PROGRAM SETTINGS> screen
and return to the normal screen.
If there is an unset item with in the program (- - -
display), the setting screen cannot be exited even
when turning the SHUTTLE ring counterclockwise.
In this case, set all unset items.
20. Press the TIMER button.
• The TIMER button lights.
• Timer recording starts if the current time is within the timer
reservation time frame.
• The power turns off and recording will be in the standby
mode if the current time is not within the timer reservation
time frame.
• Timer recording/timer recording standby can be cancelled
by pressing the TIMER button again for more than 1 second.
Not available during alarm recording.
To delete program contents, or to exit the pro-
gram without performing settings, press the WARN-
ING RESET button during program setting.
HOLIDAY SETTING
Holidays throughout the year can be set in advance.
<HOLIDAY SETTING>
--/--
--/--
--/--
--/--
--/--
--/--
--/--
--/--
--/--
--/--
MONTH/DAY
1. Press the SET UP button
"HOLIDAY SETTING" in the <TIMER PROGRAM SETTINGS>
screen to display and confirm desired holidays.
2. Turn the SHUTTLE ring counterclockwise or press the SET
UP button.
When setting a holiday in "HOLIDAY SETTING"
and select "HOL" in the day of the week settings,
the program selected with "HOL" is given priority over
the other programs.
Countermeasure
1) Set the date/time.
2) Set the correct reservation.
3) Check the settings.
1) Delete the data of HDD.
--/--
--/--
--/--
--/--
--/--
--/--
--/--
--/--
--/--
--/--
<SETTINGS>
Select
}
}
Page
20
40, 41
40, 41
43
41
Advertisement
Table of Contents
