View System Inventory - ADC HiGain HRU-402 Manual

Initializing the Maintenance Terminal Screens
V S
IEW YSTEM
The System Inventory screen allows you to view the model number, list
number, and software versions of all circuit modules.
The circuit IDs can only be set at the HLU. They are limited to 24
alphanumeric characters and, like the system settings, are stored in
Non-Volatile Random Access Memory (NVRAM) of the HLU, meaning the
data remains even when power is lost or turned off.
Setting circuit IDs is allowed when connected to particular
HiGain line units. See the HiGain line unit technical practice
to determine whether remote provisioning is allowed.
All six possible unit modules are always listed. Those that have not been
detected and are not present in the circuit are labeled Not Available (N/A). All
detected modules are fully identifiable. Whenever the line unit loses sync
with Span 1, the product types are replaced by the N/A label until sync is
reestablished and each module can in turn be determined. However, the unit
IDs remain available.
54
I
NVENTORY
December 8, 1998
150-402-111-02
HRU-402 List 1A