Table of Contents
Advertisement
GETTING STARTED
1. On the Welcome screen, tap Start.
3. The Electrode Warning message appears whether
or not electrodes are connected. Check to ensure
the electrodes are connected properly, and then tap
anywhere on the screen to continue.
NOTE:
Confirm that the electrodes and grounding pad are properly connected to the appropriate ports.
6
This document is a guide. For complete details, always refer to the NT2000iX
2. The Electrode Configuration screen appears. Set the electrode
configuration for the procedure and then tap Continue.
4. The Choose Treatment screen appears. Select the
desired treatment and then tap Continue.
RF Generator Operator's Manual.
™
Advertisement
Table of Contents
