Table of Contents
Advertisement
POWERING ON
NOTE:
In this guide, we use green boxes to indicate where you will tap the touchscreen to complete the
steps. They do not appear on the display screen itself.
2
This document is a guide. For complete details, always refer to the NT2000iX
1. Insert the power cord into the power cord connector
on the generator's rear panel.
2. Plug the other end of the power cord into a hospital-
grade AC outlet.
3. Flip the power switch located on the rear panel to
turn the generator on.
4. The system will run a self-test and then display the
Welcome screen shown above.
RF Generator Operator's Manual.
™
Advertisement
Table of Contents
