Tv Back Panel - Mitsubishi Electric LT-46244 Owner's Manual

TV Back Panel

10
TV Back Cover
Label for Back Panel #2
Back Panel #2
ANT 1/MAIN
(jack at rear
of recessed
area)
8
7
1
1. ANT 1/MAIN, ANT 2/AUX (Antenna)
If you are connecting an antenna, direct cable without
a cable box, or are using cable with a CableCARD™,
connect the main antenna or cable source to
ANT 1/MAIN. Use ANT 2/AUX for a secondary source.
ANT 1/MAIN and ANT 2/AUX can each receive digital
and analog over-the-air channels from a VHF/UHF
antenna or non-scrambled digital/analog cable source.
ANT 1/MAIN and CableCARD
Use ANT 1/MAIN to receive premium subscription cable
TV service authorized by the CableCARD™ access
card. The CableCARD access card is provided by
your local cable company. ANT 2/AUX can continue
to receive over-the-air or non-scrambled cable signals
when ANT 1 is used for CableCARD™ service.
ANT 2/AUX
(jack closest to you)
Dealer Use Only
6
1. Television Overview
9
Back Panel #1
5
2. COMPONENT Inputs
Y Pb Pr (480i/480p/720p/1080i)
Use these jacks to connect devices with component
video outputs, such as DVD players, external HDTV
receivers, or compatible video game systems. See
Appendix B specifications for signal compatibility.
3. PC/DVI AUDIO INPUT
Use the PC/DVI AUDIO INPUT when connecting a DVI
device to one of the TV's HDMI inputs using a DVI-to-
HDMI cable. These jacks allow you to send left and
right analog audio from a PC or DVI device to the TV.
4. AVR AUDIO OUTPUT
Use the AVR AUDIO OUTPUT jacks to send analog
audio of the program currently shown on the screen
to an A/V surround sound receiver or stereo system.
Digital audio from digital channels and HDMI devices is
converted to analog audio by the TV. If using an analog
4
2 3
(Audio and Video)
9