Hdtv Cable Box Or Satellite Receiver With Component Video - Mitsubishi Electric LT-46244 Owner's Manual

20
3. TV Connections

HDTV Cable Box or Satellite Receiver with Component Video

If your cable box or satellite receiver has an HDMI
output, use the connections for HDMI devices
described later in this chapter.
Required: RCA component video cables, left/right
analog stereo audio cables.
1. Connect the cable from the outside cable or satel-
lite service to CABLE IN or SATELLITE IN on the
cable box or satellite receiver. See your device's
owner's guide for instructions and cable compat-
ibility.
2. Connect RCA-type cables from the Y Pb Pr
outputs on the HDTV cable box or satellite receiver
to COMPONENT INPUTS on the TV back panel
#1, matching the colored green, blue, and red
connections.
3. Connect left (white) and right (red) audio cables
from the HDTV cable box or satellite receiver to
COMPONENT INPUTS L (MONO) and R on the TV
back panel #1.
Note: To hear digital surround sound, connect the digital
audio output from your cable box or satellite re-
ceiver directly to your digital A/V receiver.
Figure 1. Connecting an external HDTV receiver with
component video connections