Tv Back Panel - Mitsubishi Electric WD-57733 Owner's Manual

TV Back Panel

IR Emitter Jack included
on Y series and 734 series
ANT 2/ AUX
models only.
ANT 2 / AUX ANT 2 / AUX ANT 2 / AUX
ANT 1 / MAIN ANT 1 / MAIN ANT 1 / MAIN
ANT 1 / MAIN
1
1. ANT 1/MAIN, ANT 2/AUX (Antenna)
If you are connecting an antenna or direct cable without
a cable box, connect the main antenna or cable source
to ANT 1/MAIN. Use ANT 2/AUX for a secondary source.
ANT 1/MAIN and ANT 2/AUX can each receive digital
and analog over-the-air channels from a VHF/UHF
antenna or non-scrambled digital/analog cable source.
2. COMPONENT Inputs
Y Pb Pr (480i/480p/720p/1080i)
Use these jacks to connect devices with component
video outputs, such as DVD players, external HDTV
receivers, or compatible video game systems. See
Appendix A specifications for signal compatibility.
DIGITAL
AUDIO
OUT
IR EMITTER
VIDEO: 480i /480p /720p /1080i /1080p
AUDIO: PCM STEREO
NetCommand R
PC: VGA / W-VGA / SVGA / W-SVGA /
XGA / W-XGA / SXGA / 720p /1080p
7 8
(Audio and Video)
1. Television Overview
Y Pb Pr
(480i/480p/720p/1080i)
Y Pb
COMPONENT 1
COMPONENT 2
PC/DVI
AUDIO
INPUT
AUDIO
OUTPUT
INPUT 1
INPUT 2
S-VIDEO
HDMI
1 2
Third HDMI input available on
Y, 733, and 734 series models.
3. PC/DVI AUDIO INPUT
Use the PC/DVI AUDIO INPUT when connecting a DVI
device to one of the TV's HDMI inputs using a DVI-to-
HDMI cable. These jacks allow you to send left and
right analog audio from your computer or other DVI
device to the TV.
4. AVR AUDIO OUTPUT
Use AVR AUDIO OUTPUT to send analog audio of the
program currently shown on the screen to an A/V sur-
round sound receiver or stereo system. Digital audio
from digital channels and HDMI devices is converted to
analog audio by the TV. If using an analog A/V receiver
or stereo system, this is the only audio connection
needed between it and the TV.
AUDIO
Pr L MONO) R
(
AVR
VIDEO L (MONO) - AUDIO - R
3
9
2
3
4
5
6