OVERALL DIMENSIONS (Approx.)
Note: Illustrations not necessarily to scale.
Descriptions and speciﬁcations subject to change without notice. The dimensions are approximate for general information when deciding the locations and placements of the product. When creating a custom-built environment for this product, please
take exact measurements from the speciﬁc unit to be installed before doing any ﬁnished carpentry. When installing the unit, allow for air circulation, ventilation, and variations due to manufacturing tolerances. The cosmetic appearance of the product
may vary from that depicted here. Not responsible for typographical or printed errors.
DLP is a registered trademark of Texas Instruments. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. All other brand, product names and marks are trademarks, registered
trademarks or service marks of their respective holders.
OF BACK PANEL)
©2007 Mitsubishi Digital Electronics America, Inc.